Read
this before using the SCI-3100INT or SCI-3100EXT
GPS Position Locking is simply how long it takes for
the GPS unit to automatically calculate its location
after it is powered up. You will notice this when you
are reviewing the GPS recorded data with the software.
Sometimes the track will not start from the same location
it stopped. You will see small gaps in the data. The
gaps are there because of the time it takes for GPS
Position Locking. The more metal you have around or
above the 3100-INT or the GPS antenna of the 3100-EXT,
the longer it will take for GPS Position Locking. Below
is a table of how effective the unit will be, taking
into consideration the placement of the GPS Unit.
Cold start GPS Position Locking may require a minimum
of 2 minutes and warm start (sleep mode) GPS Position
Locking may require minimum of 15 seconds depending
on antenna placement and other land features or obstacles
such as tunnels, parking garages, steel buildings, etc.
• Location of GPS Unit (3100-INT model) Effectiveness
• On the Front or Rear Dash Board 99%
• Under the Front or Rear Dash Board 95%
• In the Glove Box 80 % – 95 %
GPS Antenna Placement Ratings Legend
- Highly recommend these locations for GPS antenna
placement. Best overall performance and superior signal
reception for optimum accuracy.
- Signal reception will not be as accurate or favorable.
This location will not provide the accuracy that location
1 will.
- Recommended only when other locations or options
do not exist.
Technical support questions can be e-mailed to support@skytrx.com.
Full User’s Guide and software updates can be found
on the Support Center page at http://www.skytrx.com/.
|